1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Hi Guest, welcome to the TES Community!

    Connect with like-minded professionals and have your say on the issues that matter to you.

    Don't forget to look at the how to guide.

    Dismiss Notice

OCR Computing Advice

Discussion in 'Computing and ICT' started by apmcarthur, Apr 5, 2012.

  1. Hi all

    I am hoping to deliver the OCR GCSE Computing from September of this year.

    I was just looking at the programming assignment (see below).

    What language would you use to approach this? I was thinking about small basic but most people on this forum are much more knowledgeable than me so any suggestions would be appreciated!

    Task 2 System password. 15 marks
    Design, code test and evaluate a system to accept and test a password for certain characteristics.
    ? It should be at least 6, and no more than 12 characters long
    ? The system must indicate that the password has failed and why, asking the user to re enter
    their choice until a successful password is entered.
    ? A message to indicate that the password is acceptable must be displayed.
    ? Password strength can be assessed against simple criteria to assess its suitability; for
    example a password system using only upper and lower case alphabetical characters and
    numeric characters could assess the password strength as:
    ? WEAK if only one type used, eg all lower case or all numeric
    ? MEDIUM if two types are used
    ? STRONG if all three types are used.
    For example
    hilltop, 123471324, HAHGFD are all WEAK,
    catman3 and 123456t are MEDIUM and
    RTH34gd is STRONG
    ? A message to indicate the password strength should be displayed after an acceptable
    password is chosen.
     

Share This Page