1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Hi Guest, welcome to the TES Community!

    Connect with like-minded professionals and have your say on the issues that matter to you.

    Don't forget to look at the how to guide.

    Dismiss Notice

BTEC Engineering Unit 10 - Using CAD techniques in engineering

Discussion in 'Design and technology' started by benedict16, May 26, 2011.

  1. F1 project is fine, but you could also do Scalextric 4 schools is another car based idea or i know that technology supplies have got a project using Anglepoise lamps as a starting point, that should be out shortly. There was a Brompton Bike trailer that was a good idea with some helpfull CAD files on DTEP website.
     
  2. Which text book? The one by Mike Tooley
     
  3. re

    re New commenter

    BTEC engineering level 2 by Simon Clarke et.al.
    ISBN 978 1 84690 7234

     
  4. changeagain

    changeagain New commenter

    Many thanks for the advice. I will order the book and go from there!
     

Share This Page